Untitled design

[Audio] Cutting: Hack Saw – it is use to cut metal Carpentry and Mechanical Technology.

[Audio] Cutting: Drill – it is use to create holes in wood, metal, concrete, etc… Carpentry and Mechanical Technology.

[Audio] Cutting: Cold Chisel – it is use to cut and/or remove fasteners and metal, as well as to engrave in woods Carpentry and Mechanical Technology.

[Audio] Cutting: File – it is use to form and/or smooth materials Carpentry and Mechanical Technology.

[Audio] Cutting: Scissor – it is use to cut fabric materials and paper patterns Apparel and Fashion Technology.

[Audio] Cutting: Diagonal Cutting Pliers – it is use to cut wire and other materials Automotive, Electrical & Electronics Technology.

[Audio] Cutting: Snip – it is use to cut sheet Automotive, Electrical & Electronics Technology.

[Audio] Hand Tools ( Striking/ Driving) Hammer Ball Peen Hammer Rubber Mallet Soft-Faced Hammer Center Punch Drive Pin Punch.

[Audio] Striking/ Driving: Hammer – it is use to strike nails and/or other materials Carpentry.

[Audio] Striking/ Driving: Ball Peen Hammer – it is use to strike and/or shape parts Carpentry & Mechanical Technology.

[Audio] Striking/ Driving: Rubber Mallet – it is use to strike parts without damaging surface Carpentry & Mechanical Technology.

[Audio] Striking/ Driving: Soft-Faced Hammer – it is use to strike/drive tools and parts without damaging surface Carpentry & Mechanical Technology.

[Audio] Striking/ Driving: Center Punch – it is use to drive and mark center point for drilling holes Mechanical Technology.

[Audio] Striking/ Driving: Drive Pin Punch – it is use to drive fasteners, shafts and bearings Mechanical Technology.

[Audio] HAND TOOLS SAFETY. . . HAND TOOLS SAFETY.

[Audio] Keep tools in proper working order. Look for abrasion that could cause an injury, such as a pitted hammer face, damaged insulation on a pliers, or splintered handle..

[Audio] Point cutting tools away from the body during use. Grind excess metal from mushroomed chisels. Organize tools to protect and conceal sharp cutting surfaces..

[Audio] Never use a hammer on another hammer. The impact of the hardened surfaces may cause the heads to shatter..

[Audio] Do not carry tools in a pocket. Transport sharp tools in a holder or carry with the blade pointed down..

[Audio] Remove fasteners by pulling the tool toward the body or pushing the tool away from the face..

[Audio] Always clean the hand tools before and after its usage. Perform calibration regularly to confirm if its result is still within the international standard..

[Audio] Provide designated area for all hand tools wherein visual control is observed. Always follow the guidelines on how to use hand tools properly..

[Audio] Provide working instruction on how to check it on a daily basis. Segregate and dispose defective hand tools to avoid wrong usage..

[Audio] Always follow and implement 5S in the working area..

[Audio] What is the significance of using hand tools in school shops? 01..

[Audio] Even the smallest tools can empower people to do great things 01..

[Audio] References En.wikipedia.org ( n.d), " Definition of Hand Tool" Accessed on 20 October 2020 from https://en.wikipedia.org/wiki/Hand_tool Jaidsis ( 2012), "Proper handling of Measuring Instrument" Accessed on 20 October 2020 from http://measuringdevice.blogspot .com/ 2012/09/properhandling-of-measuring-instrument.html Pantig Jr., Eduardo A. ( 2015), " School Shops" Accessed on 20 October 2020 from https://www.slideshare.net/joems_angel2000/school-shop- 47811599? qid=e126db9e-d8f1- 4523-a4cd- 948c99a7a8df&v=& b=&from_search= 1 Rahman, Taufiq (2015), " Hand Tools: A brief introduction to hand Tools" Accessed 20 October 2020 from https://www.slideshare. net/taufiqrahman5/ hand-tools- 53335219.

[Audio] THANK YOU. . . . THANK. YOU.