Scene 1

Scene 2

There are many different types of tachometers, some based on measuring the frequency of, or the time between, pulses generated by the rotating shaft .

A tachometer refers to any device that produces a signal proportional to the speed of rotation of a joint.

Scene 3

What are Tachometers Used for? The  purpose of the tachometer is to measure the rotational speed of a machine.  Tachometers  can be used to measure a wide variety of objects and performance metrics, including : Rotational speed  (   wheels or rollers ,  motors , shafts,  fans  or turbines) Travelling speed  ( conveyors ) Length  (wire , sheet products)

Scene 4

What is the difference between  tachometer  and  speedometer ?

In general the speedometer and tachometer are used to measure and display speed but to be specific they differ in what they represent.  Speedometer displays the speed of the vehicle whereas tachometer displays the speed of the engine

Scene 5

Types  of tachometer include  analog, digital, contact and non-contact units . Some are handheld and use laser light and electronics to take readings from a distance; others are purely mechanical. Regardless of type, they all measure the rotation speed of machinery, such as motors and  engines.

Scene 6

Most modern tachometers are electronic instruments featuring numerical readings and data storage capabilities. With electronic tachometers, the ignition system triggers a voltage pulse whenever the spark plug fires, at the output of the electromechanical part.

How Does an  Electronic Tachometer  Work?

Scene 7

Mechanical tachometers work by  utilizing  the dependency of centrifugal force on a rotating mass on the rotation speed. This force can compress or stretch mechanical  springs.

Scene 8

Scene 9

Contact  tachometers require contact with a rotating object to measure its RPM. They work by using an optical encoder or a magnetic sensor, depending on the particular model.

Scene 10

Non-contact  tachometers can perform measurements without the need for direct contact with the object. They commonly work with lasers or infrared light and are ideal for use with hazardous, hard-to-access, or mobile objects.

Scene 11

They are a type of non-contact tachometer and are ideal for use in difficult to access areas, such as tight spaces or working with industrial machinery. Laser tachometers feature varying detecting distances depending on the particular model, but 1-2m is standard.

Scene 12

Optical  tachometers include an optical sensor which is used to measure the rotational speed of the wheel, motor, or shaft.

Scene 13

In order to test a rev counter for a vehicle, the tachometer probe must be fitted in a  multimeter . The process of using a tachometer in an automotive application is as follows:

Scene 14

1. Put  the  multimeter  on the AC  setting 2. With  the engine on, touch the  multimeter  to the tachometer wire leading to the breaker  box 3. Enlist  the help of another individual to sit in the vehicle and record when the rev counter dial reaches particular points which are key to the calibration  process 4. The  multimeter  will simultaneously display accurate  readings 5. Compare  both readings to evaluate the tachometer’s accuracy

Scene 15

Tachometer

 What are Tachometers Used for? The  purpose of the tachometer is to measure the rotational speed of a machine.  Tachometers  can be used to measure a wide variety of objects and performance metrics, including : Rotational speed  (   wheels or rollers ,  motors , shafts,  fans  or turbines) Travelling speed  ( conveyors ) Length  (wire , sheet products)

slide3-hotlink1600

slide9-hotlink1641

slide10-hotlink1688

slide11-hotlink1746

slide12-hotlink1785

 In order to test a rev counter for a vehicle, the tachometer probe must be fitted in a  multimeter . The process of using a tachometer in an automotive application is as follows:

Tachometer

Page 1 (0s)

Page 2 (9s)

Page 3 (48s)

Page 4 (1m 20s)

Page 5 (1m 48s)

Page 6 (2m 21s)

Page 7 (2m 58s)

Page 8 (3m 28s)

Page 9 (3m 34s)

Page 10 (3m 58s)

Page 11 (4m 35s)

Page 12 (5m 16s)

Page 13 (5m 36s)

Page 14 (6m 9s)

Page 15 (6m 30s)