SERVICE DEPARTMENT SCAFFOLD SAFETY TRAINING

Service department Scaffold Safety Training

It is estimated that over 2 million worker frequently use scaffolding in t the construction field. Statistic show that the number of injuries from scaffold related accidents is an astounding 4,500 or more a year and deaths that occur from such accidents average more than 60 per year. To mitigate these risks and protect workers United Window & Door Safety Department has developed a Safety Training Program. This program provides workers with the necessary information and understanding on how to use scaffolds safely including how to protect ourselves and our co-workers. Let us begin now and learn how to stay safe while at work.

What Is a Scaffold? It's any temporary elevated platform (supported or suspended) and its supporting structure (including points of anchorage), used for supporting employees or materials or both. It is important to properly construct and maintain the scaffold in order to keep people on the site safe.

[Audio] Supported scaffolds consist of one or more platforms supported by outrigger beams brackets poles legs uprights posts frames or similar rigid support. This form of scaffolding is normally employed to provide access for maintenance and repair work in construction. It is essential to make sure that the scaffold is properly put up as it can be highly hazardous if inappropriately assembled..

It is of utmost importance that all employees understand and adhere to safety protocols when using these scaffolds. Every employee must receive appropriate instruction and training before using the equipment. Furthermore, training in inspecting and maintaining the scaffolds must be provided to guarantee its safety. If there is even the slightest doubt as to the security of the scaffold it must not be utilized. The Safety Department commits to providing the necessary education and support to ensure safe use of all scaffolding products.

In this training we'll explore key definitions integral to our understanding: Competent Person: One who is capable, through training and experience, of identifying existing and predictable hazards relating to scaffolds and has the authority to take prompt corrective measures to eliminate them. Qualified Person: One who possesses a recognized degree, certificate or professional standing; or has extensive knowledge, training and experience, and therefore, can solve or resolve problems related to the work or the project. Maximum Intended Load: The total of all persons, equipment, tools, materials, transmitted loads, and other loads reasonably anticipated to be applied to a scaffold or scaffold component at any one time. Personal Fall Arrest System: A system used to arrest an employee’s fall. It consists of an anchorage, connectors, a body harness, lanyard, deceleration device, lifeline or combinations of these.

[Audio] United Window & Door Safety Department is strongly devoted to providing a safe working environment. Here an overview of the tasks of the 'Competent Person' concerning scaffolding safety. The 'Competent Person' is accountable for inspecting the scaffold and parts before each shift assessing the possibility of providing fall protection and access assessing the connections to back up the load and avoid swaying analyzing structural strength when joining components from various manufacturers and training builders and dismantlers to detect potential work hazards. This pivotal role helps guarantee the protection of our staff and we highly value your attention to detail in this matter.

[Audio] Scaffolding is an essential element of many construction projects but it can also come with risks. To ensure the safety of the employees working on the scaffold scaffolding should be constructed in accordance with the guidelines established by the safety department. This includes considerations for capacity non-adjustable support suspension rope and connecting hardware and adjustable stall load. Furthermore, all scaffolding should be designed and built to bear the maximum intended load for longevity and safety.

Whenever working on a scaffolding platform that is 10 feet or more above a lower-level guardrails must be installed to minimize the risk of falling. All exposed sides and ends of the platform must be fitted with guardrails before it can be used. For platforms that are higher than a 4:1 ratio they must be held in place to prevent tipping with guys ties or similar restraints and must be supported as the Safety Department recommends or at the closest horizontal member to the 4:1 height. This training and the correct safety measures will ensure that all members of the Service Department are protected

Platform construction protocols must be strictly followed such that each abutted end must rest on a separate support surface. Overlap platforms must not be less than 12 inches over supports unless restrained to prevent movement. When direction changes occur platforms that rest on a bearer at an angle other than a right angle must be laid first; platforms that rest at right angles over the same bearer must be laid second. All personnel must remain vigilant in following these safety protocols to maintain a safe and productive workplace..

[Audio] When constructing a platform or walkway it is essential to ensure that it has been built appropriately and is secure. The platform must possess appropriate support be totally planked and have a gap of no more than 1 inch between neighboring units. The maximum openings between platform and uprights should be 9 -1/2 inch. The platform and walkways must be a minimum of 18 inches wide and for those not 18 feet wide guard rails and/or personal fall arrest systems must be employed. Safety is paramount so abide by these guidelines when constructing a platform or walkway..

[Audio] Safety requirements for platforms used at all times. The front edge of platforms should not exceed 14 inches from the face of the work 3 inches for outrigger scaffolds and 18 inches for plastering and lathing operations. Platforms 10 feet and less should extend at least 6 inches but not more than 12 inches past the support while platforms greater than 10 feet should not extend more than 18 inches past the support. Platform construction should also meet safety requirements.

Platform construction must be in accordance with the safety guidelines. No paint on wood platforms, except edges that may be marked for identification. Fully planked between from upright and guardrail No mixed components, unless compatible and integrity maintained. No modification of mixed components unless approved by competent person. No components or dissimilar metals unless competent person determines galvanic action will not reduce strength.

it is important to understand the components of a proper base system. Masonry blocks and bricks do not meet the safety standards for serving as a scaffold base due to their instability and lack of security. The only acceptable foundation for a scaffold is a combination of a base plate and mud sill, providing a stable and secure platform. It is imperative to prioritize safety in construction practices, and using anything other than a base plate and mud sill compromises the stability of the scaffold, potentially leading to hazardous situations. Always adhere to professional standards and guidelines to ensure a secure and reliable foundation for scaffolding structures.

safe access is essential to guarantee that all safety regulations are followed. Cross-braces must not be used as access and the bottom rung cannot be higher than 24 feet with rest platforms needed at 35 foot intervals. Slip resistant treads must be on all steps and landings and the access must be designed to be suitable for both erectors and dismantlers with end frames to be used as needed..

We urge our service department to strictly follow safety standards when dealing with scaffolds and use hook-on attachable ladders tailored to our scaffolds the lowest rung must remain no more than 24 inches above the level on which the scaffold is supported. Additionally rest platforms must be provided at 35-foot intervals when the scaffold is above 35 feet with a 11 ½ inch rung length and a maximum space of 16 ¾ inches between rungs..

scaffold should not be set up deconstructed used or modified close to energized power lines. Furthermore, the scaffold should Never overloaded Erected, moved, dismantled and altered near power lines Repair in place or replace damaged components Restrict horizontal movement with employees unless designed by register P.E Prohibit work activities during high winds unless authorized by component person Remove whole scaffold from service until repaired.

No work should be carried out on a platform covered in snow or ice and barrels boxes or ladders should never be situated on top of scaffolds. Scaffolds used in the service department should be set up and used according to industry standards and workers must always observe the appropriate safety measures.

All scaffolds must be erected moved dismantled and altered under the supervision of a competent person who is responsible for selecting and directing workers and determining the feasibility of fall protection. It is important that all instructions and procedures outlined in this training are followed in order to ensure the safety of all personnel..

Scaffolds must be assembled and inspected correctly to guarantee a safe working environment. It is necessary to Check for proper support under every leg of every frame. Check for wash out (if outside) due to rain. Check to ensure all base plates or adjustment screws are in firm contact with supports. Check frames for plumbness and squareness in both directions. Check the serviceability and correctness of all cross braces. Check to ensure that all planking and accessories are properly installed. Check to ensure that all guard rails are in place. Recheck periodically to ensure conditions remain safe.

[Audio] Scaffolds must be inspected by a competent person and initialed each day for safety purposes. Additionally if repairs maintenance or replacement are required the scaffold must be 'red tagged' and taken out of service until these modifications have been implemented. Furthermore the scaffold must be kept in a clean environment that is free from debris. Moving on the internet has drastically altered the way people interact providing opportunities and posing challenges all over the planet..

Dismantling must be carried out by competent person. Area shall be barricaded and signs board to be displayed. Manufactures dismantling instructions shall be followed. PPE’s shall be used by all engaged for the dismantling job. Scaffolders must follow safe system of work to prevent people falling. Display Warning sign “ Scaffold under Dismantling’’. Job shall be suspended in case of heavy wind or rain. Dismantling starts from the top. Rember when a scaffold has been up for a long period of time, rust or deteriorations of parts can cause it to become more difficult to take apart.

It's important to understand potential hazards when using a scaffolds. Specifically we need to be aware of five major dangers: falling from an elevation due to slipping unsafe access or the lack of fall protection; being struck by falling tools or debris; electrocution due to a scaffold being placed too close to energized overhead lines; scaffold collapse caused by instability or overloading; and bad planking giving way. It's our job to ensure that these risks are minimized. lets work together to protect against any of these incidents.

Falls from scaffolds are among the most frequent and hazardous risks. To minimize these risks, we must be continually alert to potential dangers and take the right safety measures when operating at any elevation. Before using the scaffold, it is important to carry out a thorough inspection and to always wear the right protective gear. Anyone found to be ignoring safety protocols while working on a scaffold will face disciplinary action. Let's stay safe and work smarter

we have implemented safety measures in our Service Department to protect workers from potential falls. To do this guardrails and/or Personal Fall Arrest Systems are required when workers are on scaffold heights that exceed 10 feet. This is just another way we are ensuring the security and wellbeing of our employees while they are at work..

[Audio] Scaffolding erectors and dismantlers must use Personal Fall Arrest Systems or guardrails that are at least ten feet in height as a safety measure. Since January 2000 Regulations mandate that the top-rail of said guardrails must be within the range of 38 to 45 inches high. In certain cases a cross bracing system of the same height range may be used in lieu of the top-rail or mid-rail..

Guardrails must be installed when erecting a scaffold. Install along open sides & ends Front edge of platforms not more than 12 inches from the work, unless using guardrails and/or PFAS Top rails - 38 to 45 inches tall Midrails halfway between toprail and platform Toeboards at least 3-1/2 inches high.

FALL PROTECTION REQUIREMENTS At United Window & Door safety is paramount. The Service Department is receiving Scaffold Safety Training. This course covers the fall protection requirements. It is important that employees using or being around any kind of scaffold be provided with the highest level of safety. Personal Fall Arrest Systems (P-F-A-S-) can be used in lieu of guardrails on some scaffolds. Further a combination of guardrails and P-F-A-S is necessary for suspension scaffolds while P-F-A-S is required for both erectors and dismantlers of scaffold systems.

PFAS otherwise known as Personal Fall Arrest Systems are an essential component of any workplace safety plan. These systems consist of anchorage lifeline and body harness components, and it is crucial that all workers are adequately trained in the correct use of these systems. To ensure the safety of all personnel United Window & Door Safety Department provides Service Department personnel with the necessary scaffold safety training.

Falling Object Protection  Hardhats must be worn by everyone working on or near scaffolds and the area beneath must be barricaded to prevent entry. Additionally, a canopy or net should be installed beneath the scaffold to capture or redirect falling objects. Toeboards must be installed and if the material within exceeds the height of the toeboards additional panels or screens must be added to guarantee maximum security.

Remember to: Use appropriate scaffold construction methods Erect, move, or alter scaffold properly Protect from falling objects or tools Ensure stable access Use component person Train on scaffold construction and the hazards involved with scaffold Inspect scaffold before each shift and after alterations Determine fall protection requirements Safety starts with you!!