SERVICE DEPARTMENT SCAFFOLD SAFETY TRAINING

[Virtual Presenter] Good morning everyone. Today we are here to discuss the importance of scaffold safety in the Service Department at United Window & Door Mfg. We will be covering the different types of scaffolds and the safety measures to be taken when working with them. Let's begin..

[Audio] Scaffolding plays a key role in the daily life of a construction worker. However climbing up and down a ladder exposes us and those around us to the risks of potential accidents or injuries. In order to mitigate these risks and protect workers United Window & Door Mfg. Safety Department has developed a Safety Training Program. This program provides workers with the necessary information and understanding on how to use scaffolds safely including how to protect ourselves and our co-workers. Let us begin now and learn how to stay safe while at work..

[Audio] Scaffolds are used in construction projects as a temporary elevated platform usually composed of a supporting structure platform and guardrails or toeboards to ensure safety. Anchoring points can be used to support the structure or it can be suspended. Scaffolds are important for providing a safe and reliable workspace at height and the United Window & Door Mfg. Safety Department is committed to ensure the Service Department is provided with the necessary safety training for proper use of scaffolds..

[Audio] Scaffolds are essential for construction sites to ensure the safety of those on-site. Consisting of platforms supported by outrigger beams brackets poles legs uprights posts frames or other rigid structures they provide a necessary safeguard however safety measures must be implemented to ensure their use remains secure. Without appropriate safety protocols in place risks of injury or accidents on construction sites are significantly increased..

[Audio] At United Window & Door Mfg. suspended scaffolds provide temporary access to areas that are hard to reach making them highly suitable for cleaning painting and repair tasks. It is of utmost importance that all employees understand and adhere to safety protocols when using these scaffolds. Every employee must receive appropriate instruction and training before using the equipment. Furthermore training in inspecting and maintaining the scaffolds must be provided to guarantee its safety. If there is even the slightest doubt as to the security of the scaffold it must not be utilized. The Safety Department commits to providing the necessary education and support to ensure safe use of all scaffolding products..

Definitions. Books. Competent Person: One who is capable, through training and experience, of identifying existing and predictable hazards relating to scaffolds and has the authority to take prompt corrective measures to eliminate them. Qualified Person: One who possesses a recognized degree, certificate or professional standing; or has extensive knowledge, training and experience, and therefore, can solve or resolve problems related to the work or the project. Maximum Intended Load: The total of all persons, equipment, tools, materials, transmitted loads, and other loads reasonably anticipated to be applied to a scaffold or scaffold component at any one time. Personal Fall Arrest System: A system used to arrest an employee’s fall. It consists of an anchorage, connectors, a body harness, lanyard, deceleration device, lifeline or combinations of these..

[Audio] As architectural and engineering specialists United Window & Door Mfg. Safety Department is dedicated to providing safe and efficient working environments. Our Service Department is committed to upholding the highest standard of scaffold safety and is providing comprehensive training to all erectors and dismantlers. As a competent person it is the duty of the Service Department to inspect scaffolding and components prior to each work shift to determine the feasibility of providing fall protection and access to evaluate the connections in order to support the load and prevent swaying and to determine structural soundness when intermixing components from different manufacturers. Additionally the Service Department is responsible for training erectors and dismantlers to recognize and avoid potential work hazards..

[Audio] United Window & Door Mfg. Safety Department places great emphasis on scaffold safety. Service department training is carried out to make sure all personnel are aware of the dangers of improper scaffolding set up as well as the load requirements. Such requirements comprise of non-adjustable scaffolds that are able to hold their own weight plus four times the maximum weight and support ropes and fastenings capable of withstanding six times the most extreme load. Furthermore the load of the scaffold hoist should not go beyond three times the rated load and the scaffold must be designed by a certified individual and built in accordance with the loaded design..

[Audio] At United Window & Door Mfg. the safety of our employees is our highest priority. To ensure this the Safety Department is offering Service Department Scaffold Safety Training. Whenever working on a scaffolding platform that is 10 feet or more above a lower level guardrails must be installed to minimize the risk of falling. All exposed sides and ends of the platform must be fitted with guardrails before it can be used. For platforms that are higher than a 4:1 ratio they must be held in place to prevent tipping with guys ties or similar restraints and must be supported as the Safety Department recommends or at the closest horizontal member to the 4:1 height. This training and the correct safety measures will ensure that all members of the Service Department are protected..

[Audio] At United Window and Door Mfg. Safety Department we prioritize scaffold safety. Appropriate construction is necessary for your platforms to ensure maximum safety. A minimum of 12” overlap should always be used and each abutted end must be placed on a separate support surface. When making a direction change the platform at an angle other than a right angle should be laid first followed by the platform at right angles over the same bearer. Safety is our utmost priority so please take extra care when constructing your platforms..

[Audio] United Window & Door Mfg. Safety Department is dedicated to providing the Service Department with reliable and extensive scaffold safety training. To protect our workers the organization must observe certain safety requirements when constructing a Platform. The platform must include one plank propped up by a window sill allowing for no more than 1'' hole between adjacent parts and the platform and uprights. Platforms and walkways should encompass an 18'' width with ladder jacks top plate bracket roof bracket and pump jack scaffolds at least 12'' wide. Meanwhile guardrails and/or personal falls arrest systems must be used for platforms and walkways below 18'' wide. Platforms need to be fully planked and decked 9-1/2'' at its widest opening..

[Audio] Safety is the top priority when building platforms. For scaffolds the platform must be within 14 inches of the working face. Outrigger scaffolds should be a minimum of 3 inches away while for lathing and plastering operations that amount should be 18 inches. Platforms less than 10 feet should extend between 6 and 12 inches beyond support and platforms larger than 10 feet should not exceed 18 inches beyond support. All these measures are taken to ensure the safety of workers on scaffolds..

[Audio] At United Window & Door Mfg. Safety Department we are aware of the significance of scaffold safety. We comply with stringent safety regulations to guarantee the safety of everyone. Any scaffold platform must not have any paint on the wood platform apart from any edges that might be marked for recognition. In addition the platform must be completely planked between the upright and guardrail. No combined components are allowed unless they are compatible and maintain their integrity and no alteration of any combined components is permissible without approval from an expert. Lastly no components or dissimilar metals are allowed unless an expert has ascertained that galvanic action will not weaken the platform..

[image] Base plate Mud sills. [image]. Supported scaffolds Base support.

[Audio] Scaffold safety is of utmost importance and when it comes to access it must be safe. Cross-braces should not be used for access and the bottom rung should not be higher than 24'. Rest platforms must be provided at 35' intervals and all steps and landings must be equipped with slip-resistant treads. Taking into account the needs of erectors and dismantlers end frames can be used for access when necessary..

[Audio] At United Window & Door Mfg. Safety Department we are dedicated to delivering first-rate safety training to our Service Department staff regarding scaffold access. If scaffold platforms are raised two feet or more above or below a point of access portable ladders hook-on ladders attachable ladders or other access methods should be employed to guarantee safe access. Other options may include stair towers ramps or walkways. When using portable hook-on ladders be sure to adequately place them for steadiness and to reduce the likelihood of the scaffold overturning. The rungs must also not stretch beyond 16 ¾ inches in space with a minimum of 11 ½ inches while rest platforms should be incorporated at 35-foot intervals when the scaffold is above 35 feet. By adhering to these guidelines you can feel secure about safely accessing a scaffold and preventing any falls..

[Audio] At United Window & Door Mfg. safety is our number one priority and that's why we are offering Service Department Scaffold Safety Training. On this slide you can see an example of a scaffold being placed within 10 feet of an overhead power line with 300 volts to 50KV. This is extremely hazardous and should never be done. When using scaffolding it's necessary to remember not to overload it and never erect move dismantle or alter it close to any energized power lines. Damaged parts of the scaffold should be immediately repaired in place or replaced by a registered Professional Engineer. Also no work activities should be done during high winds without permission from a Certified Professional and the entire scaffold should be taken out of service until it is fixed. Putting these safety protocols into place will help protect everyone in the working environment..

[Audio] Scaffolding can provide a secure means of accessing higher levels however caution must be taken by those using it. The Safety Department has strongly emphasized that no individual should ever use a scaffold with snow or ice present nor should they use barrels boxes or ladders on top of a scaffold. To further ensure safe utilization staff of the Service Department is currently going through specialized Scaffold Safety Training..

[Audio] Scaffolds are a commonly used tool for workplace projects but must be implemented with the utmost care to avoid costly and dangerous accidents. To ensure workplace safety the Safety Department of United Window & Door Mfg. is providing the Service Department with Scaffold Safety Training. Attendees will learn the importance of having a competent person oversee the erection moving dismantling or alteration of scaffolds and direct workers. They will also understand the importance of determining the feasibility of fall protection. The training is to ensure a safe and productive working environment at United Window & Door Mfg..

[Audio] At United Window & Door Manufacturing Safety Department we understand the importance of safety. As such we are offering Service Department Scaffold Safety Training. Before you use a scaffold you must inspect it to ensure it has proper support on each leg and if the scaffold is outside that it hasn't been washed out by rain. Additionally you must check that the base plates or adjustment screws are securely attached to the supports and that the frames are straight and square. You should also confirm that all cross braces boards accessories and guard rails are correctly installed. Lastly be sure to recheck periodically to ensure the scaffold remains safe to use..

[Audio] At United Window & Door Mfg. Safety Department we provide Service Department Scaffold Safety Training. A competent person must inspect each scaffold before each shift. Should the scaffold require repair it must be "Red Tagged" and taken out of service until repairs are done. Only qualified service technicians should perform maintenance and repairs. Additionally the scaffold must be clean and free of debris oil and grease. Now let's discuss the benefits of yoga..

[Audio] At United Window & Door Mfg. the safety of our employees is our top priority. That's why we're providing comprehensive scaffold safety training for our service department. During the training our staff will learn the importance of proper dismantling of scaffolding. They'll be taught to follow manufacturers instructions and use the correct protective equipment. Signs must be posted and the area must be barricaded. Job suspension is advised if there is wind or rain present. When dismantling start from the top being mindful of rust or deterioration as the scaffold may become more difficult to take apart after a long period of time..

[Audio] Discussing safety measures related to suspension scaffolds it is essential to ensure that the support devices are able to withstand four times the imposed load. Additionally outrigger beams either made of metal or equivalent material must be stable and restrained and connected directly to the floor or roof deck. The connection must be evaluated by a qualified individual..

[Audio] In this photo the tie-backs are not at the correct angle of ninety degrees compromising safety of the scaffolding and those who use it. To rectify this tie-backs must be corrected to ninety degrees. When using suspension scaffolds counterweights must be made of non-flowable material such as sand or gravel and must be secured until the scaffold is disassembled. Additionally tiebacks must be firmly attached to a secure anchor on the building or structure and single tiebacks must not be installed at an angle..

[Audio] It is essential to follow safety guidelines when using a suspension scaffold. Ropes should be of minimum length as recommended for the hoist and no wire rope is to be repaired. Eye splice thimbles used should be of the correct size and ropes must be inspected by a competent person. Swaged attachments are not permitted unless approved..

[Audio] Suspension scaffolds used by the United Window & Door Mfg. Safety Department provide a safe and efficient means of accessing work areas. In order to maximise safety the use of gasoline powered equipment or hoists is not permitted. All powered and manual hoists must be fitted with an automatic brake. Furthermore positive crank force must be applied when descending and the scaffolds must be securely tied to stop any swaying. Most importantly under no circumstances should any safety devices be used as platforms..

[Audio] At United Window & Door Mfg. the Safety Department is here to provide you with an important training session on the safety of scaffolds in the Service Department. Last year the U S Bureau of Labor Statistics reported more than 10000 scaffold related injuries across the country. To keep our Service Department workers safe it's important to understand the kind of accidents that can happen. These include falling from heights due to slipping lack of fall protection or objects falling on to them; electrocution from being near energized overhead lines; scaffold collapse due to instability or overload; and bad planking giving way. Let's work together to protect against any of these incidents..

[Audio] Falls from scaffolds are among the most frequent and hazardous risks. To minimize these risks we must be continually alert to potential dangers and take the right safety measures when operating at any elevation. Before using the scaffold it is important to carry out a thorough inspection and to always wear the right protective gear. Anyone found to be ignoring safety protocols while working on a scaffold will face disciplinary action. Let's stay safe and work smarter..

[Audio] In order to protect workers on a scaffold from potential fall guardrails and/or Personal Fall Arrest Systems (P-F-A-S-) must be applied if a worker on a scaffold can fall more than 10 feet. Through the adoption of these safety measures we can guarantee the security and wellbeing of workers while they are at work..

[Audio] At United Window & Door Mfg safety is an integral part of our work culture. To ensure the safety of everyone we have introduced Service Department Scaffold Safety Training. According to O-S-H-A regulations fall protection must be provided for scaffolds 10' or higher and is recommended as an alternative to guardrail systems. Furthermore top-rails for erectors or dismantlers must measure between 38" and 45" high post 1-1-2000. In certain circumstances cross bracing can be an appropriate substitute for top-rail or mid-rail. Let us make safety our top priority..

[Audio] Installing guardrails along open sides and ends of a platform is an essential safety measure to ensure the best service department scaffold safety possible. Toeboards must be at least three and a half inches high and top rails must be between thirty-eight and forty-five inches tall with a midrail halfway between the top rail and the platform..

[Audio] At United Window & Door Mfg. safety is paramount. With this in mind the Service Department is receiving Scaffold Safety Training. This course covers the fall protection requirements. It is important that employees using or being around any kind of scaffold be provided with the highest level of safety. Personal Fall Arrest Systems (P-F-A-S-) can be used in lieu of guardrails on some scaffolds. Further a combination of guardrails and P-F-A-S is necessary for suspension scaffolds while P-F-A-S is required for both erectors and dismantlers of scaffold systems..

[Audio] PFAS otherwise known as Personal Fall Arrest Systems are an essential component of any workplace safety plan. These systems consist of anchorage lifeline and body harness components and it is crucial that all workers are adequately trained in the correct use of these systems. In order to ensure the safety of all personnel United Window & Door Mfg's Safety Department is dedicated to providing Service Department personnel with the necessary scaffold safety training..

[Audio] Hardhats must be worn by everyone working on or near scaffolds and the area beneath must be barricaded to prevent entry. Additionally a canopy or net should be installed beneath the scaffold to capture or redirect falling objects. Toeboards must be installed and if the material within exceeds the height of the toeboards additional panels or screens must be added to guarantee maximum security..

[Audio] Scaffolders must observe the required minimum clearances between scaffolds and overhead power lines established by United Window & Door Mfg. Safety Department. This includes a two foot clearance for insulated power lines of less than 300 volts and a ten foot clearance for insulated power lines of 300 volts or more and all uninsulated power lines. When these clearances are not observed the power line must be de-energized relocated or a protective covering must be installed..