SERVICE DEPARTMENT SCAFFOLD SAFETY TRAINING

Scaffolding plays a key role in the daily life of construction industry. However, climbing up and down a ladder exposes us and those around us to the risks of potential accidents or injuries. To mitigate these risks and protect workers United Window & Door Safety Department has developed a Safety Training Program. This program provides workers with the necessary information and understanding on how to use scaffolds safely including how to protect ourselves and our co-workers. Let us begin now and learn how to stay safe while at work.

[Audio] United Window & Door Safety Department has developed a Service Department Scaffold Safety Training to ensure the highest safety of our workers. This training covers key safety measures of using supported scaffolds such as how to guard oneself and fellow workers on the job site. Through gaining knowledge on proper scaffold use the risk of accidents or injury can be minimized creating a safe and productive atmosphere for United Window & Door..

Scaffolds are used as a temporary elevated platform usually composed of a supporting structure platform and guardrails or toeboards to ensure safety. Anchoring points can be used to support the structure. Scaffolds are important for providing a safe and reliable workspace at height and the United Window & Door Safety Department is committed to ensure the Service Department is provided with the necessary safety training for proper use of scaffolds.

Scaffolds are essential for construction sites to ensure the safety of those on-site. Consisting of platforms supported by outrigger beams brackets poles legs uprights posts frames or other rigid structures they provide a necessary safeguard however safety measures must be implemented to ensure their use remains secure. Without appropriate safety protocols in place risks of injury or accidents on construction sites are significantly increased.

It is of utmost importance that all employees understand and adhere to safety protocols when using these scaffolds. Every employee must receive appropriate instruction and training before using the equipment. Furthermore, training in inspecting and maintaining the scaffolds must be provided to guarantee its safety. If there is even the slightest doubt as to the security of the scaffold it must not be utilized. The Safety Department commits to providing the necessary education and support to ensure safe use of all scaffolding products.

In this training we will define three important terms: competent person qualified person and maximum intended load. We will also learn about a personal fall arrest system the components of which are essential for safety. Competent Person: One who is capable, through training and experience, of identifying existing and predictable hazards relating to scaffolds and has the authority to take prompt corrective measures to eliminate them. Qualified Person: One who possesses a recognized degree, certificate or professional standing; or has extensive knowledge, training and experience, and therefore, can solve or resolve problems related to the work or the project. Maximum Intended Load: The total of all persons, equipment, tools, materials, transmitted loads, and other loads reasonably anticipated to be applied to a scaffold or scaffold component at any one time. Personal Fall Arrest System: A system used to arrest an employee’s fall. It consists of an anchorage, connectors, a body harness, lanyard, deceleration device, lifeline or combinations of these.

Competent Person Duties As a competent person it is the duty of the Service Department to inspect scaffolding and components prior to each work shift to determine the feasibility of providing fall protection and access to evaluate the connections to support the load and prevent swaying and to determine structural soundness when intermixing components from different manufacturers. Additionally, the Service Department is responsible for training erectors and dismantlers to recognize and avoid potential work hazards..

[Audio] Our organization takes the safety of its employees very seriously. That is why the Safety Department is providing Department Scaffold Safety Training. All scaffolds must be designed and built to bear the load safely. This means that a qualified person must design the scaffold and the scaffold must be able to support its own weight as well as four times the maximum intended load. The suspension ropes and connecting hardware must be able to support up to six times the maximum intended load. Additionally the stall load of a scaffold hoist must not exceed three times its rated load. By adhering to safety standards we can ensure that our employees are working on scaffolds safely..

[Audio] At United Window & Door Mfg. Safety Department we have a strong commitment to safety and provide comprehensive scaffold safety training services. When working on scaffolding with a height of 10 feet or more guardrails must be installed to provide a physical barrier for workers and prevent falls. The guardrail system should be implemented on all open sides and ends of the platforms and secured with guys ties or similar restraints when the scaffolding has a 4:1 ratio or higher. To ensure safety the restraint must be supported by the closest horizontal member at the 4:1 height. We prioritize safety and are devoted to offering the highest quality training for working on scaffolding..

[Audio] Workers must construct scaffold platforms properly for safety purposes. This slide explains the specific requirements for platform construction. Abutted ends must rest on separate support surfaces and overlap platforms must be at least 12 inches in length on supports unless restrained to prevent movement. Platforms resting on a bearer at an angle other than a right angle should be laid first whereas those rested at right angles over the same bearer should be laid second. Take these requirements into account when constructing scaffold platforms..

[Audio] At United Window & Door Mfg. Safety Department we prioritize scaffold safety training. Platforms must contain multiple planks for sufficient strength and planks must completely cover the platform with no gaps. Platforms and walkways need to be at least 18 inches wide and openings between them and uprights should not exceed 9 and 1/2 inches. Furthermore guardrails and/or personal fall arrest systems must be present when platforms or runways are not 18 feet wide. Safety training is a crucial part of our company and we make sure that all safety steps are correctly implemented..

[Audio] At United Window & Door Mfg. Safety Department we are committed to ensuring the safety of scaffolds used by our service department. Regulations state that platforms must not be more than 14 inches from the face of work for general use 3 inches from face for outrigger scaffolds and 18 inches from face for plastering and lathing operations. Platforms with 10 feet and less must extend 6 to 12 inches past the support while those with greater than 10 feet may extend up to 18 inches past the support unless dictated otherwise in the construction of the platform..

[Audio] Ensure that when constructing a platform paint is only applied to edges marked for identification and a fully planked platform must be created between the upright and guardrail. Mixed components can be used but only if their compatibility and integrity can be maintained and no modification should be done without approval from a competent person. Furthermore no components or dissimilar metals should be used unless a competent person has determined that galvanic action would not reduce the strength of the platform..

[Audio] Scaffolding safety is of paramount importance for any construction project. A sturdy and secure base platform is essential for the safety of personnel and the structural integrity of the project. To ensure top safety standards it is recommended to use a base plate and mud sill arrangement as the platform for scaffolds rather than masonry blocks or bricks which are not reliable due to their instability and lack of stability. Professionals must be consulted to guarantee that the scaffolding is constructed securely and dependably..

[Audio] United Window & Door Mfg. Safety Department is ensuring the scaffold installation and dismantling teams' safety by demanding safe access. Activities such as cross-bracing for access are not permitted the bottom rung must be no higher than 24’ rest platforms must be placed at 35’ intervals all steps and landings must have slip-resistant treads and end frames can be used for access..

[Audio] The Safety Department of United Window & Door Manufacturing is committed to ensuring your safety. When using scaffolding make sure that the Hook-on attachable ladders are designed and authorized for that particular scaffolding. The lowest rung must not be positioned higher than 24 inches from the level on which the scaffold is supported. Whenever the scaffold is higher than 35 feet rest platforms should be put up at 35-foot intervals. Additionally the minimum rung length is 11 ½ inches with a maximum gap of 16 ¾ inches between the rungs..

[Audio] At United Window & Door Mfg. ensuring scaffold safety is our top priority. To maintain safety standards we have established Service Department Scaffold Safety Training. Part of this initiative is to inconspicuously alert our staff to the need to avoid energized power lines while operating scaffolds. The slide illustrates an example of this violation as the scaffold was located in close proximity to power lines of up to 50KV. This type of violation must never occur and we must always be aware of safety regulations when engaging in any related work. We must not permit any erecting dismantling using or alteration of a scaffold near energized lines. Furthermore we cannot overload the scaffolds and any components that require repairs or replacement must remain in place. Employees are only allowed horizontal movement when specifically designed by a registered professional engineer. Additionally high winds may prevent work activities unless authorized by C P Finally the scaffold must be removed from service immediately if any repairs are needed. Our commitment to safety is unwavering and we will always provide the necessary training and supervision for safe scaffolding practices..

[Audio] In accordance with the scaffold safety training provided by the safety department it is essential that all workers strictly comply with the safety regulations. Neither working on snow or ice-covered platforms nor placing any barrels boxes or ladders on top of the scaffolds is permitted as this could lead to potential danger or death. Everyone is responsible for making sure all rules are followed which will ultimately protect workers and the surrounding environment..

[Audio] A competent person is essential to safely erect move dismantle and alter scaffolding. This person is responsible for selecting and directing workers and deciding whether fall protection is necessary. We'll now move on to the next slide which focuses on how to improve the appearance of skin issues such as acne dark spots and aging..

[Audio] The United Window & Door Mfg. Safety Department is presenting their Service Department Scaffold Safety Training. It is imperative to take safety measures before working on or near scaffolding such as examining the frame to ensure it is properly supported confirming that base plates and adjustment screws are in firm contact with supports verifying that planking and guard rails are correctly installed and checking for correct plumbness and squareness. Rechecking periodically is essential for continued safety..

[Audio] "To ensure the safety of all workers United Window & Door Mfg. Safety Department provides a Service Department Scaffold Safety Training. Before each daily shift inspection is necessary and the tag must be initialed. In the event that a scaffold is in need of repairs it will be 'Red Tagged' and taken out of service until the repairs have been completed. Qualified technicians are responsible for any maintenance and repair activities needed and the scaffold area must be kept clean and free of dirt debris oil and grease. Now let's move on to the next slide to learn more about pizza..

[Audio] At United Window & Door Mfg. safety is our number one priority and one of the ways we ensure safety is through our service department scaffold safety training. Dismantling of scaffolding must always be carried out by a competent person and a barricade should be set up along with warning signs to alert workers to the job. The manufacturer's dismantling instructions must be followed and personal protective equipment should be used by all people involved. Further any employees engaged in the dismantling should follow a safe system of work to keep people from falling. Additionally workers should be aware that corrosion or wear of parts can make dismantling more difficult after a long period of time. By following our safety standards we can help to ensure the well-being of all employees..

[Audio] At United Window & Door Mfg. Safety Department we take scaffold safety seriously. This training is dedicated to providing workers with the necessary information to avoid common hazards associated with scaffolding such as falls from elevation struck by falling tools and debris electrocution scaffold collapse and bad planking giving way. By taking this training and applying the learned strategies we can decrease the likelihood of a scaffolding incident and keep our worksite safe and accident-free..

[Audio] Falls from scaffolds are especially dangerous so let's make sure we always stay alert and take the right preventive safety measures. It's important to inspect the scaffold before using and to wear the proper protective gear. We must all take our safety protocols seriously and those who don't will face disciplinary action. We want to keep all our workers safe so let's remember to always work smarter and not risk our lives..

[Audio] Creating a safe working environment for all workers is of the utmost importance. To achieve this guardrails and/or Personal Fall Arrest Systems should be utilized to protect workers from falling more than 10 feet. In taking the necessary safety measures we can ensure the security and wellbeing of all workers in the workplace..

[Audio] The Safety Department at United Window & Door Mfg. is committed to providing a secure and efficient work environment. Our Service Department Scaffold Safety Training makes sure that employees comprehend the value of appropriate fall protection for example Personal Fall Arrest Systems or guardrails which must be utilized on scaffolds ten feet or taller. Employees need to be cognizant of any applicable rules and regulations such as the installation of top-rails after 1-1-2000 which must stand between 38” and 45” in height. In certain situations cross bracing can be substituted instead of top-rail or mid-rail. Safety is our top priority..

[Audio] At United Window & Door Mfg. Safety is our priority. The Service Department Scaffold Safety Training outlines guidelines to ensure the safe use of scaffolds. Platforms must be installed along open sides and ends with the front edge of platforms not more than 12 inches from the work unless guardrails and/or personal fall arrest systems are in place. Top rails must be between 38 and 45 inches tall with midrails halfway between the toprail and platform. Additionally toeboards must be at least 3-1/2 inches high. Finally guardrails are necessary for all scaffold platforms..

[Audio] Safety is of utmost importance in the workplace and United Window & Door Mfg. is committed to providing its employees with the necessary training to ensure their safety. This training involves understanding the proper use of personal fall arrest systems guardrails and suspension scaffolds. It is essential that everyone is aware of the precautions necessary to protect themselves from potential falls or other hazardous situations. Following these protocols is paramount for creating a safe and secure work environment..

[Audio] Good morning. United Window & Door provides its Service Department personnel with the necessary scaffold safety training to ensure the safety of all personnel. As part of this training we emphasize the importance of Personal Fall Arrest Systems or PFAS. P-F-A-S are an essential component of any workplace safety plan as they consist of anchorage lifeline and body harness components. It is important that all personnel are adequately trained in the correct use of these systems to ensure maximum safety. The United Window & Door Safety Department is committed to providing the best service possible in this regard. Thank you..

[Audio] Hardhats must be worn and the area beneath the scaffold must be barricaded when working on or near scaffolds. A canopy or net must be installed beneath the scaffold to provide extra protection against falling objects. Toeboards must be installed for maximum safety and if necessary additional panels or screens should be used to ensure that any material within the area exceeds the height of the toeboards..

[Audio] Scaffolders must be aware of the risks of electrocution when working near overhead power lines and must observe the minimum clearances established by United Window & Door Mfg. Safety Department. The required distance for insulated power lines of less than 300 volts is two feet while for insulated power lines of 300 volts or more or for uninsulated power lines the required distance is ten feet.Should the minimum clearances not be maintainable then it is necessary to de-energize relocate or install a protective covering for the power line..

[Audio] We understand the importance of scaffold safety at United Window & Door Mfg. Safety Department and are dedicated to providing ongoing training for our Service Department. Appropriate construction methods should be used scaffolds should be erected moved or altered properly protected from falling objects have a stable access include the use of components and personnel be trained on scaffold construction and related hazards be inspected before each shift and after any alterations and finally have fall protection requirements determined. It is everyone's responsibility to stay safe so let's ensure these points are kept in mind. Thank you for tuning in..