Sensitivity: Internal (C3). HEALTH, SAFETY AND ENVIRONMENT. 

Scene 1

PROJECT : RE DEVELOPMENT OF CHENNAI EGMORE RAILWAY STATION.

Scene 2

20230209132204. TATA TATA CONSULTING ENGINEERS LIMITED ENGINEERING A BETTER TOMORROW SINCE 1962 Safety, Health & Environment Policy We at Tata Consulting Engineers Limited are committed to continually improving our performance related to Safety, Health and Environment. Towards this end, we will ensure that: Senior Leaders demonstrate visible commitment through their behaviour. Safe and healthy environment is provided to all its employees at their workplaces; safety and health are not compromised for economic considerations. Safety, Health and Environment are recognized as an integral part of our operations. Safe work practices are observed in all projects and sites we are associated with. Environment friendly practices are adopted in meeting our own needs. We strive to advocate environment friendly solutions to our Customers, in the projects we work on. Safety, Health and Environmental hazards are proactively identified and risks are assessed and controlled. • Employees are trained to perform their work in a safe and environmentally responsible manner. We will implement this policy in compliance with all applicable Safety, Health and Environmental codes and standards as well as legal and statutory requirements. 27th September 2015 Amit Sharma Managing Director. 

Scene 3

TATA
TATA CONSULTING ENGINEERS LIMITED
ENGINEERING A BETTER TOMORROW SINCE 1962
Safety, Health & Environment Policy
We at Tata Consulting Engineers Limited are committed to continually
improving our performance related to Safety, Health and Environment.
Towards this end, we will ensure that:
Senior Leaders demonstrate visible commitment through their behaviour.
Safe and healthy environment is provided to all its employees at their
workplaces; safety and health are not compromised for economic
considerations.
Safety, Health and Environment are recognized as an integral part of our
operations. Safe work practices are observed in all projects and sites we
are associated with.
Environment friendly practices are adopted in meeting our own needs.
We strive to advocate environment friendly solutions to our Customers, in
the projects we work on.
Safety, Health and Environmental hazards are proactively identified and
risks are assessed and controlled.
• Employees are trained to perform their work in a safe and environmentally
responsible manner.
We will implement this policy in compliance with all applicable Safety, Health
and Environmental codes and standards as well as legal and statutory
requirements.
27th September 2015
Amit Sharma
Managing Director

Scope of Works. Demolition ,Piling, Civil & Structural, MEP works, facade & Finishing works, Interior works, External development works, Cable Rerouting works. 

Scene 4

Demolition ,Piling, Civil & Structural, MEP works, facade & Finishing works, Interior works, External development works, Cable Rerouting works

Gandhi Irwin side Station Building Departure Concourse Poonamallee Station Building  Arrival Foot Over Bridge (FOB) Arrival Concourse cum unpaid connection Parcel Foot Over Bridge (FOB) MLCP – Gandhi Irwin Road side MLCP – Poonamallee Road side Parcel Building

Platform area (Except coping) Substations Tensile Structure Residential building  (Location shall be anywhere) Through Roof COP (Cover Over Platform) External Development for Gandhi Irwin Road side External Development for Poonamallee Road  Side demolition ,  Relocation of utilities

Major works at site at present Piling works Lifting activity Excavation Concreting Chipping Material shifting , Loading , Unloading Rerouting of Signal Cables Fabrication work HT & LT Cable Identification & Rerouting. 

Scene 5

Major works at site at present  Piling works Lifting activity  Excavation  Concreting  Chipping  Material shifting , Loading , Unloading  Rerouting of Signal Cables Fabrication work HT & LT Cable Identification & Rerouting

INDI
Project
Client
PMS
TATA
Il'iin
REDEVELOPMENT
OF
D.E.C
THE STANDARD OF QUALITY
CHENNAI EGMORE
RAILWAY STATION
CHENNAI DIVISION
SOUTHERN RAILWAYS
: TATA CONSULTING ENGINEERS
LIMITED
TATA CONSULTING ENGINEERS LIMITED
EPC AGENCY
DEC INFRASTRUCTURE & PROJECTS
(INDIA) PVT.LTD
D.E.C Dabia Sadan,2-1-434/1 St.No. 4, Nailankunta, Hyderabad - 500044
Telangana, India
Date of Commencement : 13.12.2022

EMERGENCY EVACUATION PLAN -GANDHI IRWIN ROAD SIDE (GI SIDE) DRINKING WATER FIRE POINT FIRST AID EMERGENCY AMBULANCE ACCESS POINT ASSEMBLY POINT. 

Scene 6

EMERGENCY EVACUATION PLAN -GANDHI IRWIN ROAD SIDE (GI SIDE)
DRINKING WATER
FIRE POINT
FIRST AID
EMERGENCY AMBULANCE
ACCESS POINT
ASSEMBLY POINT

Scene 7

First-Day Induction. Purpose of Induction: A guide to familiarize D.E.C Infrastructure project (India) Private Limited Safety Standards. For employees and subcontractors to know what is expected from them in the Management System. It is COMPULSORY for ALL. 

Scene 8

Purpose of Induction: A guide to familiarize D.E.C Infrastructure project (India) Private  Limited Safety Standards. For employees and subcontractors to know what  is expected from them in the Management System.
 It is COMPULSORY for ALL

First-Day Induction. SAFETY & SECURITY INSTRUCTION. 

Scene 9

Personal Protective Equipment (PPE). Safety Helmet with Chin Strap Safety Shoes with steel protection. 

Scene 10

Safety Helmet with Chin Strap Safety Shoes with steel protection

Hand Gloves Safety Goggles Ear Plug Safety Belt

Must be  made  available  for use  when  required

Personal Protective Equipment (PPE). Ear Safety Harness. 

Scene 11

Permit-To-Work. General work ( Painting, plastering, material shifting etc.,) Hot works (Welding, gas-cutting etc.) Excavation Works with Electrical Clearance Certificate (Utility Survey Checklist) Height Work (> 1.8 metres height) Electrical work Lifting Works (Tower Crane, Mobile Crane and Crawler Crane) Scaffolding works Working in Confined Space Demolition Permit. 

Scene 12

General work ( Painting, plastering, material shifting etc.,) Hot works (Welding, gas-cutting etc.) Excavation Works with  Electrical Clearance Certificate (Utility Survey Checklist) Height Work (> 1.8 metres height) Electrical work Lifting Works (Tower Crane, Mobile Crane and  Crawler Crane) Scaffolding works  Working in Confined Space Demolition Permit

Scene 13

Scene 14

Scene 15

Only Trained Lifting Supervisor and Riggers/ Signalmen can conduct lifting operations.. 

Scene 16

Only Trained Lifting  Supervisor and  Riggers/ Signalmen  can conduct lifting  operations.

LIFTING OPERATIONS. Jan & Jul. Feb & Aug. Mar & Sep. 

Scene 17

Monthly color coding for electrical hand tools, machineries and Lifting gears

LIFTING OPERATIONS. Trained Operators Presence of LS & Rigger/Signalman. 

Scene 18

Trained Operators Presence of LS &  Rigger/Signalman

LIFTING OPERATIONS. Don’t use damaged Lifting Gears (e.g. ropes, belts etc) Safety latch Inform LS & Safety Personnel. 

Scene 19

Don’t use damaged Lifting  Gears (e.g. ropes, belts etc) Safety latch Inform LS & Safety  Personnel

_:fiF.. LIFTING OPERATIONS. Do not stand below the load while lifting in operation.. 

Scene 20

Do not stand  below the load  while lifting in  operation.

Excavators  CANNOT be used  as a lifting machine  unless Approved  by Safety  Personnel.

LIFTING OPERATIONS. Store at designated areas Inspect before use. 

Scene 21

Store at designated areas Inspect before use

[image] rigging loft slings shackles wires lifting equipment Stock Photo Adobe Stock

Scene 22

DEMOLITION. abstract. Do’s. Dismantling and Material handover should be done before the demolition work start All utilities connection termination should be done before start the demolition. Special Work permit for Demolition Use Water sprinkler machine for dust control Flag man/banksman should be available Wear proper PPE ( Like Mask, Ear plug, Safety Shoe, Safety Helmet and Hand gloves Etc.,) Use Hard Barrication, Green net Barrication and Sign Boards Use Electrical cables through Overhead. 

Scene 23

Dismantling and Material handover should be done before the demolition work start All utilities connection termination should be done before start the demolition. Special Work permit for Demolition Use Water sprinkler machine for dust control Flag man/banksman should be available  Wear proper PPE ( Like Mask, Ear plug, Safety Shoe, Safety Helmet and Hand gloves Etc.,) Use Hard Barrication, Green net Barrication and Sign Boards Use Electrical cables through Overhead

DEMOLITION. abstract. Don’ts. Don’t start the demolition work without Dismantling and Material handover work done Don’t start the demolition work without utilities service termination Don’t Lay the electrical cables ground level Don’t stand the Demolition machine swing area If the demolition building near the railway track don’t start the work without Railway authorities. 

Scene 24

Don’t start the demolition work without Dismantling and Material handover work done Don’t start the demolition work without utilities service termination Don’t Lay the electrical cables ground level Don’t stand the Demolition machine swing area If the demolition building near the railway track don’t start the work without Railway authorities

Don’t start near debris falling area Don’t start the work without hard Barrication and Green net Barrication provision.

Scene 25

Do’s  Only Trained Person have been deputed at Railway Track Activity Stay away from running time trains from both directions while passing over the work site Deploying a watchman on both sides with hooters/Whistle to keep a watch on the approaching trains and alert the workers well in time. 

Scene 26

Do’s  Only Trained Person have been deputed at Railway Track Activity Stay away from running time trains from both directions while passing over the work site Deploying a watchman on both sides with hooters/Whistle to keep a watch on the approaching trains and alert the workers well in time

Use insulated hand tools only While passing the idle train engine, make sure it is secured with a wheel stopper. Use Proper and dry PPE Every Time, wearing Reflective Jacket very important while working on railway track activities  Walkie – Talkie Communication while working in railway track

[image] Steel Railcar Chocks and Blocks for Trains and Railcars

Don’ts Without inducted worker and Engineers not allowed on Railway track activity Don’t cross the tracks unnecessarily No horse play , no laying / sleeping at the railway track premises. 

Scene 27

Don’ts Without inducted worker and Engineers not allowed on Railway track activity Don’t cross the tracks unnecessarily  No horse play , no laying / sleeping at the railway track premises

Don’t shifting the materials Vertically through railways tracks under the OHE lines (like Steel pipes, Rods etc.,) Don’t use mobiles and headphones at Railway tracks Don’t use uninsulated hand tools

[image] Use of earphones during driving claims two lives Hindustan Times

[image] Earphones can kill you Times of India

Scene 28

PILING ACTIVITY. Don’ts Don’t start the piling work without utility survey Don’t operate the Rig machine without swing alarm Don’t go near the bore hole without a fall protection Don’t stand Rig machine swing radius Don’t enter the work location without appropriate PPEs Don’t use Agur positioning without knowing UG utilities. 

Scene 29

Don’ts Don’t start the piling work without utility survey Don’t operate the Rig machine without swing alarm Don’t go near the bore hole without a fall protection Don’t stand Rig machine swing radius  Don’t enter the work location without appropriate PPEs Don’t use Agur positioning without knowing UG utilities

PILING ACTIVITY. Do’s Utility survey must be done Proper location marking Hard Barrication Cotter pin should be present in Agur Turn on the Swing alarm while rig machine running condition Lifting tools and tackles should be inspected Wear appropriate PPE while rebar cage lapping welding work. 

Scene 30

Do’s  Utility survey must be done Proper location marking Hard Barrication Cotter pin should be present in Agur Turn on the Swing alarm  while rig machine running condition  Lifting tools and tackles should be inspected Wear appropriate PPE while rebar cage lapping welding work

Wear Rubber gloves and Goggles while bentonite mixing and fleshing Only Competent  work crew and operators allow to perform the piling activity Must provide proper illumination while night time Close the bore hole once boring done with rebar cage

Scene 31

Working at Height. Don’ts Don’t work Without safety belt or Full body Harness (above 1.8 meter height) Don’t work without edge protection. 

Scene 32

Don’ts Don’t work Without safety belt or Full body Harness  (above 1.8 meter height) Don’t work without edge protection

Working at Height. Do All staff, subcontractors and workers working at height must be provided Sound & adequate safety barricades Fall-arresting equipment (i.e. Safety belt with shock absorber/harness). 

Scene 33

Do All staff, subcontractors and workers working at height  must be provided Sound & adequate safety barricades Fall-arresting equipment (i.e. Safety belt with shock absorber/harness)

Working at Height. Ladder must be secured. abstract. 

Scene 34

Safe access to workplaces must be sound and  maintained at all times.

Scene 35

abstract. abstract. SCAFFOLDING SAFETY. Scaffold erection/alteration/dismantling shall be Performed by trained Scaffold Erectors. Supervised by trained Scaffold Supervisors.. 

Scene 36

Scaffold erection/alteration/dismantling shall be Performed by trained Scaffold Erectors. Supervised by trained Scaffold Supervisors.

[image] 10 scaffold safety essentials Canadian Occupational Safety

[image] Premium Photo Scaffolding at construction site. 

Scene 37

[image] Premium Photo Scaffolding at construction site

Any part of a scaffold  (i.e. cross-braces,  metal decks etc.)  MUST NOT be  removed without  approval. No Single Planks Work material to be  removed Proper Access Ensure the Scaffolding Fitness Tag  Only use scaffolding after authority signed

[image] Scaffold Inspection Safety Checklist Raken

0
CAUTION DANGER
This scaffold does NOT
DO NOT USE
MEET FederallState
THIS SCAFFOLD
OSHA Spcifications
KEEP OFF
All employees working
This scaffold is being
from this scaffold must
erected, taken down or
wear and use an approved
has been found
safety harness,
DO NOT ALTER
DO NOT ALTER
COVETENTPERSON
COMPETENT PERü
SIGNATURE:
ATTENTION
THIS SCAFFOLD
MEET SAFETY
REGULATIONS
IT IS SAFE
TO USE
SEE

Working Platform >500 mm wide Toe Board (90 mm) must be provided. 

Scene 38

Working Platform >500 mm wide Toe Board (90 mm)  must be provided

Barricade - 1.2 m high  Mid Rail - 0.6 m high Toe Board (90mm)

[image] Types of scaffolding and their uses BPS Access Solutions Blog. 

Scene 39

[image] Types of scaffolding and their uses BPS Access Solutions Blog

Scene 40

FALLING OBJECTS. Loose materials must be kept at least 600 mm away from edges at all times.. 

Scene 41

Loose materials must be kept at least 600 mm away from edges  at all times.

Scene 42

EXCAVATION SAFETY.  Utility Survey,  Barrication,  Toe Board,  Warning sign etc,.. 

Scene 43

 Utility Survey,   Barrication,  Toe Board,    Warning sign   etc,.

[image] Adjustable Access Stairs for Excavation Access. 

Scene 44

[image] Adjustable Access Stairs for Excavation Access

Provide and  maintain proper  shoring, cave-in Protection

Scene 45

abstract. MANUAL HANDLING & MATERIAL SHIFTING. Manual Lifting procedure.. 

Scene 46

abstract. MANUAL HANDLING & MATERIAL SHIFTING. Used Appropriate PPE like Shoulder Pad, Hand Gloves, Safety Shoes, Safety Helmet etc.,. 

Scene 47

Used Appropriate PPE like Shoulder Pad, Hand Gloves, Safety Shoes, Safety Helmet etc.,