Weekly quality Review meeting

Good Manufacturing Practices for Contract Workmen.

[Audio] Contents Module Content Scope Module-I GMP Preamble Personal Hygiene Gowning Clean Room Labelling Documentation Personal Behavior G-M-P Area Contract Workmen Module-II Visual Inspection Visual Inspectors.

GMP Preamble. GMP stands for Good Manufacturing Practices. It is a set of guidelines and regulations. GMP is to ensure consistent quality and safety of pharmaceutical products. Adhering to GMP principles is essential to ensure the safety, efficacy, and quality..

Personal Hygiene. Eating, drinking, chewing are strictly prohibited in clean room premises. Keeping plants, food, drink, personal medicines are strictly prohibited into clean room premises. Smoking & keeping smoking material is strictly prohibited in factory premises. Proper haircut, clean shave, trim & clean nails are mandatory. Sanitize hands properly before entering the clean rooms. Wash hands before and after handling the product..

[Audio] Personal Hygiene Wear clean clothes before entering into the clean rooms. Person with illness or open lesions are not allowed to handle the manufacturing activities. Health examinations prior to execution of activities & periodically. Periodic eye examinations for personnel conducting visual inspections. Avoid direct contact with the products being handled..

[Audio] Why... Freeborn County Historical Museum Library & Village | Facebook No Jeans in the factory premises Buy Formal Shirts For Men Online In India Upto 50% Off Beyoung Wear formal attire The Terrible Tees Well Sewn No T-shirts in the factory premises Wear Collar shirts.

[Audio] Personal Hygiene Have a routine clean shave Have a proper hair cut Wear only shoes in factory premises No Slippers inside factory premises.

[Audio] Personal Hygiene No cigarette packets are allowed in factory premises No Gutka packets/pan are allowed in factory premises Cutting Nails Stock Illustrations – 251 Cutting Nails Stock Illustrations Vectors & Clipart Dreamstime Finger nails to be trimmed short ID card to be worn while entering the premises.

[Audio] 10 good reasons to wash your hands…and make your mother proud! » Virtuous Triad Υπηρεσίες HACCP / Ασφάλειας Τροφίμων Wash hands before and after handling the product. No Diseases And Wounds Rgb Color Icon Hand Injury Water Vector Hand Injury Water P-N-G and Vector with Transparent Background for Free Download Srr570 SignRoundRed German: Niemals Krank Zur Arbeit! 43% O-F-F Person with illness or open lesions are not allowed to handle the manufacturing activities. Wear Hand Gloves while handling the product Wear P-P-E (Personnel Protective Equipment).

[Audio] Remove all Jewelry Sign No Ornaments Allowed No loose hair for Women Don’t keep unwanted things in pockets.

[Audio] Gowning Enter into the respective module secondary change room through respective entry door. Sit on the cross over bench Wear booties over the shoe Wear primary apron Cross the cross over bench. Feet should touch to the floor with booties over shoes. Wear the head gear/snood. Wear antistatic boiler suit over primary garment..

[Audio] Gowning Wear the goggles. Check in mirror for proper gowning and ensure total body should cover. Roll the sticky roller at 360º over secondary gowning. Sanitize the hands with 70% I-P-A solution. Wear the hand gloves and enter into the process area..

[Audio] Gowning-Entry Procedure at P-F-I Enter into the Secondary change room Cross the cross over bench Sanitize the hands with 70% I-P-A--. Wear the head gear/ snood. Wear the boiler suit. Wear Boiler suit by inserting the boiler suit inside the booties and tie properly. Wear the goggle Stand in front of the mirror to ensure proper gowning. Roll the sticky roller over the boiler suit. Disinfect the hands with 70% I-P-A--. Wear the hand gloves Enter into the process area.

[Audio] Gowning-Exit Procedure at P-F-I Enter into the Secondary change room. Remove the goggle and keep it in the SS cabinet. Remove the hand gloves and drop in used gloves bin. Remove the booties boiler suit & head gear/snood and drop in the used garment bin Cross the cross over bench Exit from the change room to the corridor.

[Audio] Gowning-Entry Procedure at FD Enter into the first change room. Wash and dry hands. Remove the street footwear and keep it in the designated rack. Remove the street dress personal belongings and keep them in the locker provided. Enter into second change room. Collect the uniform which contains boiler suits snood and booties from uniform collection area. Wear the snood which contains Snood locking so as to cover the head and face. Wear the boiler suit and fasten it properly then use the finger locking provision Take factory footwear and wear Wear the booties on top of the factory footwear by sitting on crossover bench Check in the mirror for proper gowning. Use sticky roller over the gowning Touch to the static discharge touch pad and apply hand disinfectant: 70% I-P-A on hands. Enter into the process corridor. A collage of people in a bathroom Description automatically generated A collage of people in a bathroom Description automatically generated A collage of people in a bathroom Description automatically generated A collage of a person wearing blue protective gear Description automatically generated A collage of a person wearing blue protective gear Description automatically generated A collage of a person wearing blue protective gear Description automatically generated.

[Audio] Gowning Use sticky roller on secondary gowning to avoid hair contamination Don’t wear damaged garments Use clean and washed Garments.

[Audio] Keep personal belongings in locker Don’t enter into process areas without gowning Drop the Gown in used bin after usage.

[Audio] Clean Rooms Clean Room.. A clean room is a controlled environment. Clean room minimize contamination. Clean room allows to maintain a specified cleanliness level. Importance of Clean Room To prevent contamination of product from dust & foreign particles To avoid product mix-up To prevent microbial contamination To produce Quality product.

[Audio] Always Wear Full Gowning in Clean Room Don’t wear the Gown with damages and loose threads.

[Audio] Don’t use damaged or dirty gloves Use shoe covers as per change room instructions.

[Audio] Report Wall Paint Peel-off to Supervisor Report Floor damages immediately to supervisor.

[Audio] Report coving damages Report Water leakages from ceiling.

[Audio] Don’t mix the spilled tablets Don’t mix the spilled material Report the spillage to Supervisor.

[Audio] Place the product containers on pallet Drop the spilled tablets in Rejection Bin.

[Audio] Don’t enter/exit from Eemergency Door in-case no emergency Report to Supervisor if any pests observed.

[Audio] Floor should be in clean condition during manufacturing operations Report to Supervisor if hair observed in clean room area/change room.

[Audio] Do Not Step Vector Art Icons and ... Labelling Product Identification: Verify the label accurately for product name brand or generic name. Material Identification: Check the Green Color approved label while transferring goods to dispensing area and/or charging area. Dosage Information: Verify the dosage strength on the label and don’t mix the product containers with other strengths of same product and/or different products. Storage Conditions: Check for storage instructions including temperature humidity and light exposure requirements and inform to supervisor if any variations observed. Expiration Date: Verify the expiration date of the materials and don’t consider the expired materials for manufacturing activities..

[Audio] Batch/Lot Number: Verify the batch number or lot number is present and corresponds to manufacturing records. Patient Information Leaflet (P-I-L--): Verify the intactness and code of P-I-L--. Legibility: Verify that the label is legible. Barcodes and Identification Marks: Check for barcodes or other identification marks for tracking and tracing of the product. Warnings and Precautions: Verify warnings and precautions on the label and follow them without fail. Ask the supervisor if any clarity required..

[Audio] Case Do’s Don’ts Peel-off label Inform to supervisor Don’t through in dust bin. No label Inform to supervisor Don’t proceed for any activity without intimation Damaged Label Inform to supervisor Don’t proceed for any activity without intimation Label with Incorrect or Incomplete Information Inform to supervisor Don’t proceed for any activity and Don’t update the incomplete information Print Quality Poor Inform to supervisor Don’t proceed for any activity and Don’t take another print Mislabeling Inform to supervisor Don’t proceed for any activity and Don’t correct the information.

[Audio] Cross the label on the containers while submitting to scrap Update the status after completion of activity Read and Follow Label Instructions.

[Audio] Documentation Use only permanent ball-point ink Don’t overwrite do not use Gel Pen Make entries legible and clear for easy traceability (readable). Initial and date all entries (unless a signature is required). Recording in G-M-P document should be contemporaneous. Do not use white-out or correction fluid note pad sticker paper or eraser Do not make entry in back date. Do not record data before the action or event has occurred. Do not use rough and unofficial notebook for recording.

[Audio] Sign with Date Upon Supervisor Approval Don’t overwrite.

[Audio] Follow Date and Time Format as per S-O-P Don’t write on the hand.

[Audio] Place the documents at designated place Place the unwanted papers in Drop Box.

[Audio] Don’t Photocopy any document without supervisor approval Don’t tear the document.

What is MTSS/PBIS? | Plankinton School District 1-1.

[Audio] Personal Behavior Take Training before doing any activity Listen to the Supervisor Instructions Carefully.

[Audio] Respect the Supervisor/Employees Follow the Instructions of Supervisor.

[Audio] Don’t run in office/manufacturing area Don’t make noise Don’t use Mobile Phone.

[Audio] Follow the Break Timing Don’t throw and catch the items Don’t sit on floor/stairs/Container.

[Audio] Human resources Free user icons Human resources Free user icons Human resources Free user icons Human resources Free business and finance icons Don’t argue with supervisor/employees Don’t spit on walls and floor Don’t fight with anyone.

[Audio] Do Not Step Vector Art Icons and ... Training Module-II Visual Inspection Visual inspection performed to identify any defects in Tablets Gel Caps Capsules and Imprinted Tablets. Personnel performing manual visual inspection are considered for training and qualification for the task. Training covers inspection techniques criteria for acceptance/rejection and identification of defects. P-P-E such as gloves lab coats safety glasses and masks are required during inspection. Maintain a clean and hygienic inspection environment to prevent contamination of pharmaceutical products. Inspectors should follow hygiene conditions including hand washing and wearing clean gloves. Proper Lighting and uniform lighting conditions to facilitate accurate inspection of products..

[Audio] Visual Inspection Inspectors should be free from distractions such as noise conversations or interruptions. Regular breaks to prevent fatigue and maintain inspector concentration levels. Rotation of inspectors as needed. Document inspection activities including inspection results deviations and any other relevant information..

[Audio] Visual Inspection. Visual Inspection. Presence of more than one product (Product Mix Up) - 6000ÖJ 36 {Öåöä)å Incorrect Color.

Visual Inspection. Non-Uniform Color Olottling): Broken Tablets:.

Visual Inspection. Core not fully coated: 600 56 Peel off:.

[Audio] Visual Inspection. Visual Inspection. Surface Blemishes. (Pits, Pimples) Sticking:.

[Audio] Visual Inspection. Visual Inspection. Oil spots on the tablets: {Öflö Yellow spots on the tablets: 6)åJO).

Visual Inspection. Broken Gel Caps: 00M Incorrect Color sob.

[Audio] Defective Capsules. Visual Inspection. Capsule Inspection Machine - SaintyTec.